English
Spanish
Filters Sort results
Reset Apply
Image | Name | SKU | Description | Quantity | |
|---|---|---|---|---|---|
 | FiberTite KEE Tuff Trac – Walkway, 30″ x 100″ | KEE TuffTrac Walkway, 30″ x 100″ – Protection & Walkways – SKU: 35504207A30ER | |||
 | Fibertite Membrane Stress Plates: FTR-IW IsoWeld Plates | FTR-IW IsoWeld Plates – 500/pail – SKU: 3IWPSF FiberTite Induction Weld (IW) plates are designed to secure roof insulation and roofing membranes in FiberTite Induction Welded Roofing System. Plates are 3 inches round, specially coated Galvalume Steel, installed with FTR Magnum Fasteners on steel, wood or structural concrete decks. All FTR Induction Weld plates have […] | |||
 | FiberTite Membrane Stress Plates: Magnum 2S 2.375” Barbed Round | Magnum 2S 2.375” Barbed Round – 1000/pail – SKU: MBNBLTPLT FiberTite #15 Magnum Fasteners and Magnum-Plus Stress Plates are designed and engineered to provide enhanced load distribution and superior wind resistance for all mechanically attached FiberTite Roofing Systems. | |||
| FiberTite Membrane Stress Plates: Magnum Plus Oval 1.5” x 2.75” | Magnum Plus Oval 1.5” x 2.75” – 500/pail – SKU: MGOVALCFPLUS FiberTite #15 Magnum Fasteners and Magnum-Plus Stress Plates are designed and engineered to provide enhanced load distribution and superior wind resistance for all mechanically attached FiberTite Roofing Systems. | |||
| FiberTite Membrane Stress Plates: Magnum R275 Barbed Round | Magnum R275 Barbed Round – 500/pail – SKU: MGPLT2.75 FiberTite #15 Magnum Fasteners and Magnum-Plus Stress Plates are designed and engineered to provide enhanced load distribution and superior wind resistance for all mechanically attached FiberTite Roofing Systems. | |||
 | FiberTite Roof Perimeter Caution Strip | Perimeter Caution Strip, 5” x 100’ – Protection & Walkways – SKU: 81280173A5R FiberTite® Roof Perimeter Caution Strip provides a highly visible warning for service personnel. | |||
| FiberTite Roof Perimeter Caution Strip – 10” x 100’ | Perimeter Caution Strip, 10” x 100’ – Protection & Walkways – SKU: 81280173A10R FiberTite® Roof Perimeter Caution Strip provides a highly visible warning for service personnel. | |||
 | Fleece Back Membrane Adhesives – FTR 390 | Water Based Asphalt Emulsion; 250 sf/pail – 5 gal Pail – FTR 390 – SKU 548 FTR 390 is a water borne, environmentally friendly, rubberized asphalt adhesive for adhering FiberTite-FB “Fleece Back” Membrane(s) to a variety of compatible substrates. | |||
| Fleece Back Membrane Adhesives – FTR 490 | Water Based One-Sided; 450 sf/pail – 5 gal Pail – FTR 390 – SKU FTR636 FTR-490 is a high performance, polymeric water borne adhesive for adhering FiberTite-FB “Fleece Back” Membranes to a variety of compatible substrates. | |||
| Fleece Back Membrane Adhesives – Polyset CRA/CR-20 – Summer Grade | Part A&B, Foam Splatter Pattern; 200 sf/set – Set – SKU ICPCR20HFOKIT Applicator and Hose: 180 usd (One Gun and One Hose) CRA Spare Tips: 42 usd (10 Extra Nozzles) Seaman Corporation supplies Polyset® Commercial Roof Adhesive (CRA) for installing Fleece Back Membrane in authorized FiberTite Roofing Systems. CRA is a two component elastomeric polyurethane […] | |||
 | Foam Insulation Adhesives – FTR-601 ECO | Part A&B, Bead Applied; 3500 sf/set – Set – SKU FTR-601 ECO FTR 601-ECO Fleece-Back and Insulation Adhesive is a dual component low-rise polyurethane foam adhesive that is VOC free, contains no solvents, and sets in minutes. | |||
| Foam Insulation Adhesives – FTR-601 PG – 3000sf | Part A&B, Bead Applied; 3000 sf/set – 5 gal Set – SKU BAGINTHEBOXPG-1 FTR 601-PG (Pump Grade) Fleece-Back and Insulation Adhesive is a dual component low-rise polyurethane foam adhesive that is VOC free, contains no solvents, and sets in minutes. | |||
| Foam Insulation Adhesives – FTR-601 PG – 9000sf | Part A&B, Bead Applied; 9000 sf/set – 15 gal Set – SKU FTR601PUMPGRADE15 FTR 601-PG (Pump Grade) Fleece-Back and Insulation Adhesive is a dual component low-rise polyurethane foam adhesive that is VOC free, contains no solvents, and sets in minutes. | |||
| Foam Insulation Adhesives – Polyset CRA/CR-20 – Summer Grade | Part A&B, Bead Applied; 3000 sf/set – Set – SKU ICPCR20HFOKIT Applicator and Hose: 180 usd (One Gun and One Hose) CRA Spare Tips: 42 usd (10 Extra Nozzles) Seaman Corporation supplies Polyset® Commercial Roof Adhesive (CRA) for installing Fleece Back Membrane in authorized FiberTite Roofing Systems. CRA is a two component elastomeric polyurethane designed […] | |||
 | Fortilock Catalyst -Self-Terminating Liquid Flashing | Reactive Agent Used to Induce Curing – Packet – SKU: FORTI-LOCK-CAT-PACK Forti-Lock™ Catalyst Powder is a reactive agent used to induce curing of Forti-Lock™ Liquid Flashing products. | |||
 | Fortilock Fleece – 14″ x 165′ | Non-woven Polyester Reinforcement – roll – SKU: FORTI-LOCK-FLEECE-14 Forti-Lock™ Fleece is a non-woven polyester reinforcement used in Forti-Lock™ Liquid Flashing applications. | |||
 | Fortilock Liquid Flashing – Summer Grade | PMMA Liquid Resin; White, Gray – 2.5 gal Pail – SKU: FORTI-LOCK-SG-WHITE Forti-Lock™ Liquid Flashing with KEE-Bond™ Technology is a high performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin for use in aberrant penetrations and low flashing terminations. Forti-Lock™ is available is Summer Grade (SG) and Winter grade (WG) formulations. | |||
 | FTR SBS Adhesive | Elastomeric Modified Adhesive; 50-65 sf/gal – 5 gal Pail . SKU: FTRSBSADHESIVE FTR SBS Adhesive is a cold-process low-VOC, low-odor and solvent-free SBS modified adhesive for bonding FiberTite® SBS Base Sheets to approved substrates. | |||
 | FTR SBS Poly 3.7 Modified Membrane | Modified Bitumen and Vapor Barrier: FTR SBS Poly 3.7 – 1 sq Roll – SKU: FTR SBS Poly 3.7 Whether installing an air & vapor barrier or a multi-ply asphalt base layer for hybrid roof systems, FiberTite’s SBS Modified Bitumen Base Sheets have multiple applications to fit specific job needs and code requirements. | |||
 | FTR Value ISO: 20 PSI – Flatstock 1.5″ and up | FTR Value ISO: 20 PSI – Flatstock 1.5″ and up FTR-Value polyisocyanurate roof insulation consists of polyiso foam core with superior fire performance characteristics and the ability to retain its high R-values over time. | |||
| FTR Value ISO: 20 PSI – Flatstock less than 1.5″ or Tapered | FTR Value ISO: 20 PSI – Flatstock less than 1.5″ or Tapered FTR-Value polyisocyanurate roof insulation consists of polyiso foam core with superior fire performance characteristics and the ability to retain its high R-values over time. | |||
 | Large Pre-Flashed, 1-way Breather Vent Off White | Large Pre-Flashed, 1-way Breather Vent Off White – SKU CJ81WRVBE | |||
 | Miscellaneous Fasteners: 1.25” Zamac Zinc Expansion Anchors | 1.25” Zamac Zinc Expansion Anchors – 1000/pail – SKU: ZA1.25 | |||
| Miscellaneous Fasteners: 1″ #14-10 SSA with Washer T-Bar Fastener | 1″ #14-10 SSA with Washer T-Bar Fastener – 2500/pail – SKU: 150 | |||
 | Patented FiberTite Wheel Kit | Patented FiberTite Wheel Kit – SKU: WH-KIT-VAR-RIB |